In the field of construction, concrete scraper, as an important construction equipment, can directly affect the progress and quality of the project. However, many operators often overlook the maintenance issues of the concrete scraper, resulting in various equipment malfunctions and problems. This article will take you to understand the importance of maintaining a concrete scraper and the corresponding steps and precautions.

Maintenance steps:

1. Cleaning: After each use, the concrete scraper should be cleaned thoroughly, including the body, conveyor belt, mixing device, and other parts. This helps to remove residual concrete and debris, preventing them from solidifying on the equipment.

2. Applying lubricating oil: Regularly applying lubricating oil to the bearings, chains, and other parts of the concrete scraper can reduce wear and improve the service life of the equipment. But be careful not to use excessive lubricating oil to avoid oil leakage in the equipment.

3. Inspection of components: Regularly inspect various components of the concrete scraper, such as conveyor belts, chains, bearings, etc., to ensure that they are in good working condition. If damage or looseness is found, it should be replaced or tightened in a timely manner.

4. Maintenance of hydraulic system: The hydraulic system is the core part of the concrete scraper, and it is necessary to regularly check the quality and level of hydraulic oil to ensure the normal operation of the hydraulic system.

5. Clean the electrical system: Regularly inspect the electrical system of the concrete scraper, including cables, plugs, switches, etc., to ensure that its insulation is good and there are no signs of damage or aging.

Precautions:

1. Safety: During maintenance, operators should wear corresponding safety protective equipment, such as protective glasses, gloves, etc., to avoid concrete splashing and injury to the human body.

2. Attention: When applying lubricating oil, it is necessary to avoid contaminating electrical components with lubricating oil, otherwise it may cause equipment short circuits or malfunctions.

3. Keep the equipment clean: The concrete scraper needs to be kept clean regularly, especially for the electrical parts. Avoid dust or other debris entering electrical components to prevent circuit failure or equipment malfunction.

4. Regular inspection of cables: Regularly inspect the cables of the concrete scraper to ensure that the cables are not damaged or aged. Cable damage or aging may cause equipment malfunction or abnormal operation.

5. Avoid overloading: When using a concrete scraper, avoid overloading. Overloading can lead to equipment overload and damage, shortening the service life of the equipment.

6. Storage: When the concrete scraper is not in use, it should be stored in a dry place. Avoid exposing the equipment to damp environments to prevent rusting or damage.

7. Maintenance: Regularly send the concrete scraper to the maintenance station for maintenance and inspection. The repair station can provide inspection and maintenance for equipment, ensuring that the equipment remains in good working condition for a long time.

The maintenance of the concrete scraper is a very important task, which can directly affect the efficiency and lifespan of the equipment. Therefore, operators should regularly carry out equipment maintenance and upkeep to ensure that the equipment is always in good working condition.